NGHIÊN CỨU THỰC NGHIỆM ĐÁNH GIÁ ẢNH HƯỞNG CỦA CÁC THÔNG SỐ CÔNG NGHỆ TỚI ĐỘ NHÁM BỀ MẶT KHI TIỆN TINH THÉP HỢP KIM 9XC BẰNG DAO TIỆN PHỦ TiN TRÊN MÁY TIỆN CNC ROTURN 400C

Đỗ Anh Tuấn; Dương Hải Nam

EXPERIMENTAL RESEARCHES EVALUATING THE INFLUENCE OF TECHNOLOGICAL PARAMETERS ON SURFACE ROUGHNESS WHEN TURNING FINISH 9XC ALLOY STEEL BY TiN COATED TURNING TOOLS ON ROTURN 400C CNC LATHE

Authors

Đỗ Anh Tuấn Author
Dương Hải Nam Author

Keywords

Reasonable cutting mode

Abstract

The article researches building of a process for selecting a reasonable set of cutting parameters by empirical statistical method based on the initial parameters of the workpiece materials & turning tools, combined with the inherited method for synthesis, compare & evaluate in order to provide a reasonable set of cutting parameters (V, S, t) affecting the surface roughness when turning finish 9XC alloy steel by TiN coated turning tools on Roturn 400C CNC lathe.

Downloads

Download data is not yet available.

Downloads

PDF Download

Published

2026-10-08

Issue

No. 40 (2023): Tạp chí số 40

Section

Science & Technology

Science & Technology October 8, 2026

THE IMPROVEMENT OF AECC CRYTOSYSTEM BY POINTS ON THE ELLIPTIC CURVE: A PROPOSAL

The AECC cryptosystem on elliptic curves uses an algorithm to generate a data series before launches the process of encryption and decryption. The advantage of the data sequence generation algorithm is the increase of the cryptanalysis complexity but it has disadvantage which is…

Mai Mạnh Trừng, Ngô Quang Trí, Lê Thị Thu Hiền, Lê Trung Thực
Science & Technology October 8, 2026

APPLICATION TABU SEARCH ALGORITHM FOR SOLVER VEHILCE ROUTING PROBLEM

The main objective of this research is to find a solution to the Vehicle Routing Problem using genetic algorithms. Vehicle Routing Problem (VRP) is a complex combinatorial optimization problem of class NP-complete. The Vehicle Routing Problem is a math problem, and the original…

Cao Ngọc Ánh, Trần Bích Thảo
Science & Technology October 8, 2026

ENHANCING COGNITIVE SKILLS FOR STUDENTS THROUGH APPLIED MATHEMATICS EDUCATION

The article refers to the teaching method that responds to innovative thinking in awareness for students. The author has given 3 core techniques: language conversion, practice asking questions and detecting and solving false situations in learning Applied Mathematics. Through th…

Trần Thị Hoàng Yến
Science & Technology October 8, 2026

RESEARCH ON SELECTION OF GRINDING CONDITIONS FOR MACHINING TITANIUM ALLOY Ti6AL4V

Titanium Ti-6Al-4V alloy is a widely used material in industry, but it is also an extremely difficult alloy to work due to its high adhesion. numbers with reasonable machining conditions are still difficult. In this paper, the Taguchi method has been applied to determine the opt…

Phạm Vũ Dũng

Most read articles by the same author(s)

Phạm Văn Liệu, Dương Hải Nam, STUDY ON THE EVALUATION OF POROSITY IN HVOF-SPRAYED WC-12CO COATINGS ON 40Cr STEEL SUBSTRATES FOR AUTOMOTIVE CAMSHAFT RESTORATION APPLICATIONS , Journal of Science and Technology, University of Economics – Technology for Industries: No. 54 (2026): Tạp chí số 54
Nguyễn Thị Hương, Dương Hải Nam, ANALYSIS OF VIBRATION, CUTTING TOOL WEAR WHEN TURNING LONG SHAFT USING THE TAGUCHI METHOD , Journal of Science and Technology, University of Economics – Technology for Industries: No. 43 (2024): Tạp chí số 43
Hoàng Anh Tuấn, Đỗ Anh Tuấn, RESEARCH THE EFFECTS OF POWER LASER, CUTTING SPEED AND NOZZLE DIAMETER TO THE SURFACE ROUGHNESS IN LASER CUTTING OF SKD11 STEEL , Journal of Science and Technology, University of Economics – Technology for Industries: No. 35 (2022): Tạp chí số 35
Nguyễn Tường Vi, Bùi Ánh Hưng, Dương Hải Nam, RESEARCH ON THE SELECTION OF APPROPRIATE PRIMING INJECTION IN MAXIMUM TORQUE MODE WHEN CONVERTING CONVENTIONAL DIESEL ENGINE TO USE DUAL FUEL LPG/DIESEL FUEL ENGINE , Journal of Science and Technology, University of Economics – Technology for Industries: No. 39 (2023): Tạp chí số 39
Trịnh Thị Mai, Trần Trọng Thể, Đỗ Anh Tuấn, Hoàng Trọng Hưng, THE APPLICATION OF MASTERCAM SOFTWARE TO CREATE POST-PROCESSOR SUPPORTING OUT OF THE MACHINE PROGRAM USED ON CLK6140D/2 CNC LATHE , Journal of Science and Technology, University of Economics – Technology for Industries: No. 34 (2022): Tạp chí số 34
Phạm Vũ Dũng, Đỗ Anh Tuấn, A RESEARCH FOR BUILDING THE MODEL OF MONITORING WHEEL WEAR GRINDING WHEN MACHING Ti6Al4V ALLOY ON FLAT GRINDING MACHINE , Journal of Science and Technology, University of Economics – Technology for Industries: No. 38 (2023): Tạp chí số 38
Dương Hải Nam, Nguyễn Văn Điện, Phạm Văn Liệu, THE INFLUENCE OF PARAMETERS ON THE HARDNESS OF WC-12Co ALLOY COATING ON GX 15-32 GREY CAST IRON SUBSTRATE BY HVOF SPRAYING TECHNOLOGY , Journal of Science and Technology, University of Economics – Technology for Industries: No. 49 (2025): Tạp chí số 49

EXPERIMENTAL RESEARCHES EVALUATING THE INFLUENCE OF TECHNOLOGICAL PARAMETERS ON SURFACE ROUGHNESS WHEN TURNING FINISH 9XC ALLOY STEEL BY TiN COATED TURNING TOOLS ON ROTURN 400C CNC LATHE

Authors

Keywords

Abstract

Downloads

Downloads

Published

Issue

Section

Most read articles by the same author(s)

Similar Articles